How To Reset Maintenance Light on Nissan Titan After Oil Change (2004-2021)
Last Updated on November 7, 2020 by Christ
How To Reset Maintenance Light on Nissan Titan After Oil Change (2004-2021) – The Nissan Titan is a full-size pickup manufactured in the USA by Japanese carmaker Nissan since 2003. It was named after the Titan god of Greek mythology.
The first generation (A60) was produced from 2003 until 2015. And for the second generation (XD) was unveiled to the public at the Detroit Motor Show in 2015.
Contents
How To Reset Maintenance Light on Nissan Titan After Oil Change (2004-2021)
When the engine oil exceed the specified service interval, the maintenance reminder light will appear on the display. You should perform an oil change and reset the system. Depending on your vehicle model, here are a few ways to reset the oil light on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Nissan Titan:
1st Generation A60 (2004-2015)
The first generation of Nissan Titan was marketed from 2004 to 2015. There are two ways to reset the oil life in this generation. Depending on your vehicle model year, here are how to reset the maintenance engine oil light on the Nissan Titan:
With Audio Display
Time needed: 7 minutes
Follow these instructions if your vehicle is 2004 2005 2006 2007 model years.
- Turn on the ignition without starting the engine
Make sure your vehicle is stopped
- Go to MAINTENANCE menu by pressing the TRIP button repeatedly
The button is located on the centre console
- Scroll down and select ENGINE OIL
Use the joystick to scroll and press ENTER to select
- You can reset or set the distance for service interval on this menu
Select the MAINTENANCE SCHEDULE to set the maintenance interval, or select RESET to reset the interval
With Cluster Knob
For the 2008 model and above you can follow the steps as follows:
- Turn on the ignition without starting the engine
- Go to SETTINGS mode by pressing the INFO knob repeatedly
- In the setting mode screen rotate the INFO knob to move to MAINTENANCE menu
- Press the knob to select the menu
- Select ENGINE OIL
- You can set an engine oil reminder at a specific interval or select RESET on this menu
2nd Generation A61 (2016-2021)
The second generation is today’s latest models, this generation was introduced since 2016. Here’s how to reset the maintenance oil light on the latest generation of Nissan Titan:
- Press the ENGINE START STOP button two times without depressing the brake pedal
- Go to the ⚙️ SETTINGS menu by using the ◄ ► navigation button
- Scroll down to the MAINTENANCE by using the ▲▼ navigation button and press OK button to enter
- Select OIL AND FILTER or OIL CONTROL SYSTEM
- You can set an engine oil reminder at a specific interval or select RESET on this menu
- When a confirmation message appears, select YES to execute the oil reset
Repeat this guide to reset Oil Filter, Tire and Other Maintenance if needed.
This tutorial is based on the Nissan Titan owner’s manual. This procedure should apply to the first and second generations of Nissan Titan (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Maintenance Light on Nissan Titan After Oil Change (2004-2021) can solve your problem. Good Luck!
My 2004 Nissan Titan does not have that audio display that you’re talking about none of those buttons are available to me so I can turn my light off LOL it’s pretty comical actually