Reset Guide: GMC Sierra Oil Life Oil Change Light (2007-2021)
Last Updated on February 11, 2021 by Christ
Reset Guide: GMC Sierra Oil Life Oil Change Light (2007-2021) – The Sierra is a full-size pickup made by GMC. The third series of the Sierra was launched in late 2006 for the 2007 model year and is based on the GMT900 platform.
The engines of the previous generation have been replaced by a new series of more powerful power units. The 4.3 L V6 engine and the 4.8 L, 5.3 L, and 6 L V8 engines (which produced 195 hp, 295 hp, 315 hp, and 363 hp, respectively) were confirmed.
Contents
Reset Guide: GMC Sierra Oil Life Oil Change Light (2007-2021)
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Depending on your vehicle model, here are a few ways to reset the oil life light on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 GMC Sierra:
Easiest Way
Time needed: 7 minutes
The easiest way to reset the oil life on this vehicle is by pressing the accelerator pedal 3 times. Here’s how to do it:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, hold down the ENGINE START/STOP button without pressing the brake pedal
- Fully depress the GAS pedal, three times within 5 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
3rd Generation (2007-2013)
In addition to using the Gas pedal, you can also perform oil reset through the cluster display on this old generation. Here’s how to do it:
- Turn on the ignition without starting the engine
- Press the VEHICLE INFO button briefly until “OIL LIFE REMAINING” appears on the screen
- Press and hold the ✓ button until Oil Life 100% appears on the screen
- Verify the indicator has been reset by starting the engine
4th Generation (2014-2018)
In this fourth generation there are 2 other ways besides using the gas pedal to reset the oil life.
With Trip Button
- Turn on the ignition without starting the engine
- Turn the TRIP knob on the cluster until “OIL LIFE” appears on the screen
- Press and hold the TRIP knob until oil life change to 100%
- Verify the indicator has been reset by starting the engine
With Steering Button
- Turn on the ignition
- Press the ◄ navigation button to enter the cluster app
- Select INFO
- Find the OIL LIFE menu by using the ▲▼ navigation button
- Press and hold the ✓ button to execute the oil life reset
5th Generation (2019-2021)
Just like the previous generation, there are 2 other ways besides using the gas pedal to reset the oil life. In this latest generation, you can reset the oil life by accessing the cluster app. Here’s how to do it:
With Cluster Button
- Turn on the ignition without starting the engine
- Turn the TRIP knob on the cluster until “OIL LIFE” appears on the screen
- Press and hold the TRIP knob until oil life change to 100%
- Verify the indicator has been reset by starting the engine
With Steering Button
- Turn on the ignition without starting the engine
- Access the INFORMATION (i) menu by using the ◄or► navigation button
- Find the OIL LIFE menu by using the thumbwheel
- Press and hold down the thumbwheel to reset the oil life at 100%
- Verify the indicator has been reset by starting the engine
These instructions are based on the GMC Sierra owner’s manual. This procedure should apply to the third, fourth, and fifth generations of the GMC Sierra (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: GMC Sierra Oil Life Oil Change Light (2007-2021) can solve your problem. Good Luck!
Leave a Reply