Tips

How To Reset Check Engine ECU Warning Light on Nissan Frontier

How To Reset Check Engine ECU Warning Light on Nissan Frontier – Nissan Frontier is the product of Nissan which has an Autotech design concept. No doubt about it, indeed to the appearance of the car 4 × 4 or Nissan pickup truck creature looks very manly, masculine, luxurious and sporty. Starting from the fascia design the front of the Nissan Navara has a design like an SUV but more ferocious because it has a radiator grille that is bigger and stronger with chrome accents concept Half V shape and has a headlight and turn signal fused makes the Nissan Frontier is increasingly fierce, manly and luxury.

In the lower part has a front bumper with fog lamp is large enough on each side will give the impression that the car is strong and sturdy. Furthermore, on the side, the Nissan Frontier has a distinctively design 4 × 4 pickup truck with a flatbed on the back make this car more felt his Off-Road shades. On the side which has a chrome-accented rearview mirror with turn signal and has alloy wheels with sporty design makes the Nissan Frontier is a more luxurious look.

How to Reset Check Engine ECU Warning Light on Nissan Frontier:

Time needed: 17 minutes

If you want to turn off or clear the Check Engine Light / ECU light in 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Nissan Frontier, perform the following procedures within the specified time! Because timing is extremely critical.

  1. Turn the ignition key to position “ON” without starting the engine and wait 3 seconds.

  2. Fully press and release the accelerator pedal five times within 5 seconds.

  3. Wait 7 seconds

  4. Fully depress the accelerator pedal all the way to the floor and hold for ten seconds. until the CEL starts blinking.

    At this point, the light CEL should start flashing error code stored in the system and you can release the pedal. If you only get five flashes slowly or not flashing at all, then it is time You went on one of the above steps and you have to start from scratch.

  5. Fully release the accelerator pedal (while the CEL is still blinking) and wait about 10 seconds.

  6. Fully depress the accelerator pedal and keep it for more than 10 seconds.

  7. Fully release the accelerator pedal (The CEL light will continue to blink).

  8. Turn the ignition off and start the engine to verify the indicator has been reset.

For more details, please watch the following video:

Note: Repeat the process, if the lights still illuminate when you start the engine. Timing is EXTREMELY critical to resetting the ECU. This tutorial is based on the Nissan repair manual. This procedure should be work on all generations of Nissan Frontier (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How To Reset Check Engine ECU Warning Light on Nissan Frontier useful for you. Good Luck!

Christ

Recent Posts

Exploring the Tech-Advanced Safety Features of Honda Civic

When it comes to safety on the roads, nothing beats the sterling integration of technology…

1 year ago

Mastering Car Oil Changes: Crucial for Business Efficiency

Imagine a car engine as the heart of a business. Without proper and regular maintenance,…

1 year ago

Avoiding Common Car Maintenance Mistakes

Maintaining the health of your car is much like maintaining your health. Ignoring minor symptoms…

1 year ago

Petrol vs Diesel: Unravelling the Used Jeep Wrangler Conundrum

The quest to find the perfect engine variant, when in the market for a used…

1 year ago

Mastering DIY Checks for a Used Jeep Wrangler

When it comes to advancing your automotive acumen, understanding the ins and outs of purchasing…

1 year ago

Key Maintenance Tips for Used Jeep Wranglers

Jeep Wranglers, known for their robust character and off-road prowess, can prove to be resilient…

1 year ago

This website uses cookies.