How To Perform Oil Life Reset on Mercury Sable (2008-2009)
Last Updated on October 23, 2020 by Christ
How To Perform Oil Life Reset on Mercury Sable (2008-2009) – The Mercury Sable is a mid-size car manufactured by Ford Motor Company and sold under the semi-luxury brand Mercury. Mechanically it is the same as the Ford Taurus; they share the same platform.
Production of the Sable began in 1986 and ceased production on April 29, 2005. Since 1986, it has been manufactured at plants in Atlanta, Georgia and Chicago, Illinois. For the 2008 model, it is manufactured only in Chicago.
How To Perform Oil Life Reset on Mercury Sable (2008-2009)
Time needed: 7 minutes
Did you get a Change Oil Soon or Oil Change Required message on your 2008 2009 Mercury Sable? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the SETUP button briefly until “OIL LIFE % HOLD RESET = NEW” appears on the screen
The button is located on the steering
- Press the RESET button for 2 seconds and release to reset oil life to 100%
Done!
These instructions are based on the Mercury Sable owner’s manual. This procedure should apply to the fifth generation of the Mercury Sable (2008 2009 model years). Hopefully, the article How To Perform Oil Life Reset on Mercury Sable (2008-2009) can solve your problem. Good Luck!
Leave a Reply