How To Perform Maintenance Oil Life Light Reset on Acura TL (2009-2014)
Last Updated on September 24, 2020 by Christ
How To Perform Maintenance Oil Life Light Reset on Acura TL (2009-2014) – The Acura TL is an E-segment passenger car from the Japanese brand Acura. It is a four-door sedan equipped with either front or four-wheel drive. It replaced the Acura Vigo and ranked above the Honda RSX and Acura TSX, and below the Acura RL.
Some of the TL’s main rivals are the Lexus GS, Infiniti M, Audi A6, BMW 5 Series, and Mercedes-Benz E-Class. The TL and RL were replaced in 2014 by the Acura TLX.
How To Perform Maintenance Oil Life Light Reset on Acura TL (2009-2014)
Time needed: 7 minutes
Did you get a maintenance service warning light every time you turn on the ignition on your 2009 2010 2011 2012 2013 2014 Acura TL? This means you must immediately perform maintenance services and oil change on your vehicle. Do not forget to reset the service interval afterward. Here’s how to do it:
- Turn on the ignition without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START STOP button twice without pressing the brake pedal
- Press the SEL/RESET button repeatedly until engine oil life appears on the display
The button is located on the steering wheel
- Press and hold the SEL/RESET button until reset mode appears on the display
Press the SEL/RESET button for more than 10 seconds
- Select RESET to execute the oil life reset
Done!
This tutorial is based on the Acura TL owner’s manual. This procedure should apply to the second generation of Acura TL (2009 2010 2011 2012 2013 2014 model years). Hopefully, the article How To Perform Maintenance Oil Life Light Reset on Acura TL (2009-2014) can solve your problem. Good Luck!
Leave a Reply