Hyundai Creta: How To Reset Wrench Service Light (2016-2019)
Last Updated on December 30, 2020 by Christ
Hyundai Creta: How To Reset Wrench Service Light (2016-2019) – The Hyundai Creta or also known as the Hyundai ix25 is a crossover produced by the South Korean carmaker Hyundai Motor Company. Initially intended for the Indian market only, Creta was later put on China and Russia.
The car was brought forward by a concept car presented at Beijing in April 2014 salon. The second generation was presented during the Shanghai show in April 2019 and went on sale in August.
Hyundai Creta: How To Reset Wrench Service Light (2016-2019)
Time needed: 7 minutes
The service light will flash each time you turn on the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Here is how to reset the service light on 2016 2017 2018 2019 Hyundai Creta:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
The button is located on the steering wheel
- Find and select SERVICE INTERVAL
Use the navigation switch to scroll and press OK button to enter the. menu
- Make sure you activate the service interval function by giving a check mark
In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance
- Use the navigation switch to change the digit value. Press the OK button to confirm the changes.
Done!
These instructions are based on the Hyundai Creta owner’s manual. This procedure should apply to the first generation of the Hyundai Creta (2016 2017 2018 2019 model years). Hopefully, the article Hyundai Creta: How To Reset Wrench Service Light (2016-2019) can solve your problem. Good Luck!
Leave a Reply