Mercury Mountaineer Fuel Inertia Switch Reset Location
Last Updated on February 9, 2020 by Christ
Mercury Mountaineer Fuel Inertia Switch Reset Location – The Mountaineer was a luxury mid-size SUV produced by Mercury from the 1997 model year to the 2010 model year. The model was very similar to the Ford Explorer even if there were differences, especially with regard to the line. The Mountaineer was positioned, in the Ford group range, above the Explorer.
The engine was installed at the front, while the rear or traction was integral. The Mountaineer was offered only with five-door SUV bodywork. It was assembled in Louisville and Saint Louis. The Mountaineer was removed from production on the occasion of the suppression of the Mercury brand.
Mercury Mountaineer Fuel Inertia Switch Reset Location
Time needed: 7 minutes
The fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the Mercury Mountaineer, the fuel pump shut-off switch is located in the passenger’s footwell, by the kick panel.
May you need to remove the lower scuff plate to access the switch.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the ON position (Do not turn the ignition to ‘START) and wait a few seconds and return the key to off position.
Warning! Do not reset the fuel system shut-off switch if you see or smell fuel from the fuel system.
This tutorial is based on the Mercury owner’s manual. This procedure works on a 2002 2003 2004 2005 2006 2007 2008 2009 2010 Mercury Mountaineer that uses the Petrol engine. Hopefully, the article of Mercury Mountaineer Fuel Inertia Switch Reset Location useful for you.
Sound advice but didn’t work