Citroën Jumpy: How To Reset Service Light (2007-2014)
Last Updated on May 7, 2021 by Christ
Citroën Jumpy: How To Reset Service Light (2007-2014) – The Citroën Jumpy is a light commercial vehicle produced by the French car manufacturer Citroën since June 1994. The third generation of this van is currently in production.
In 2007 he debuted the second series of Jumpy together with his sisters. The aesthetics are inspired by the Citroën Jumper third series, while the engines are the 90 HP 1.6 Hdi, the 120 HP 2.0 Hdi, and the 140 HP 2.0 petrol engine. Since July 2013, the Jumpy is also sold under the Toyota brand as the first series of the Toyota ProAce.
Citroën Jumpy: How To Reset Service Light (2007-2014)
Time needed: 3 minutes
When the wrench or spanner indicator appears and flashes in the display, it’s time for regular service at the workshop. The service interval must be reset after performed the maintenance service on your vehicle. Here is how to reset the service light on Citroën Jumpy:
- Place the ignition to the off position
Make sure your vehicle is stopped in a safe place
- Press and hold the TRIP button
The button is located on the cluster
- Turn on the ignition without starting the engine
The screen will start the countdown
- Keep press the TRIP button until the countdown is complete
Release the button when the display shows “=0”
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Citroën Jumpy owner’s manual. This procedure should apply to the second generation of the Citroën Jumpy (2007 2008 2009 2010 2011 2012 2013 2014 model years). Hopefully, the article Citroën Jumpy: How To Reset Service Light (2007-2014) can solve your problem. Good Luck!
Leave a Reply