Citroën C-Zero: How To Reset Wrench Service Light (2010-2019)
Last Updated on April 24, 2021 by Christ
Citroën C-Zero: How To Reset Wrench Service Light (2010-2019) – The Citroën C-Zero is an electric car from the French car manufacturer Citroën produced from 2010 to 2019. The vehicle was developed in collaboration with Mitsubishi Motors Corporation and shared the setting with the Peugeot iOn model.
Like its two sisters, the car has an egg-shaped minivan, similar to that of the smaller Smart Fortwo, which, however, is a car powered by a traditional internal combustion engine. Internally the C-Zero is homologated for four seats and has a small trunk.
Citroën C-Zero: How To Reset Wrench Service Light (2010-2019)
Time needed: 3 minutes
When the wrench or spanner indicator appears and flashes in the display, it’s time for regular service at the workshop. The service interval must be reset after performed the maintenance service on your vehicle. Here is how to reset the service light on 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Citroën C-Zero:
- Place the ignition to the off position
Make sure your vehicle is stopped in a safe place
- Press the INFO button briefly until 🔧 service indicator displayed
The button is located on the instrument cluster
- Hold down the INFO button until 🔧 indicator flashes
Release the button when the indicator start flashes
- Press the INFO button again to execute the service reset
The CLEAR and then new time remaining before the next service due will appears in the screen
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Citroën C-Zero owner’s manual. This procedure should apply to the first generation of the Citroën C-Zero (2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article Citroën C-Zero: How To Reset Wrench Service Light (2010-2019) can solve your problem. Good Luck!
Leave a Reply