2017-2021 Chrysler Pacifica Oil Change Required Light Reset Guide
Last Updated on November 20, 2020 by Christ
2017-2021 Chrysler Pacifica Oil Change Required Light Reset Guide – The Chrysler Pacifica is a large people carrier produced by the US carmaker Chrysler starting in 2016. This car was made to replace the Town & Country and Grand Voyager models.
The engine range consists of the 3.6-litre V6 Pentastar petrol delivering 287 horsepower and combined with the nine-speed ZF 9HP “TorqueFlite” automatic transmission. The average consumption declared is equal to 10.7 litres per 100 km (American cycle).
Contents
2017-2021 Chrysler Pacifica Oil Change Required Light Reset Guide
When you exceed the next scheduled oil change interval, the Oil Change Required light will display in the screen. This indicator system must be reset after performed the maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2017 2018 2019 2020 2021 Chrysler Pacifica:
With Gas Pedal
Time needed: 7 minutes
The fastest way to reset the oil light on all Chrysler car models is by pressing the gas pedal. Here’s how to get started:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Fully depress the GAS pedal, three times within 10 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
With Cluster Display
In addition to using the gas pedal, you can also reset the oil through the instrument cluster by using the steering control button. Here’s how to do it:
- Press the ENGINE START/STOP button twice without pressing the brake pedal to make the vehicle in the RUN position without start the engine
- Go to the VEHICLE INFO by using the ▼navigation button
- Scroll to the OIL LIFE menu by using the ◄ ►navigation button
- Press and hold the OK button to execute the oil life reset
These instructions are based on the Chrysler Pacifica owner’s manual. This procedure should apply to the latest generation of the Chrysler Pacifica (2017 2018 2019 2020 2021 model years). Hopefully, the article 2017-2021 Chrysler Pacifica Oil Change Required Light Reset Guide can solve your problem. Good Luck!
Leave a Reply