Buick Encore: How To Reset Oil Life Light After an Oil Change (2013-2021)
Last Updated on January 14, 2021 by Christ
Buick Encore: How To Reset Oil Life Light After an Oil Change (2013-2021) – The Buick Encore is a crossover-type passenger car produced by the US car manufacturer Buick since 2013. It is the first small SUV produced by the American house, Buick.
The first generation of the Encore derives from the European Opel Mokka first series. Buick unveiled the Encore’s second-generation alongside the Buick Encore GX at the 2019 Shanghai Motor Show. There are two engines available, both petrol and turbocharged.
Buick Encore: How To Reset Oil Life Light After an Oil Change (2013-2021)
Time needed: 7 minutes
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Here is how to reset the oil life light on Buick Encore.
- Turn on the ignition without starting the engine
If your car equipped with ignition button, press and hold the Start/Stop button for 5 seconds without touch the brake pedal
- Press the MENU button briefly until “VEHICLE INFORMATION” appears on the screen
The button is located on the turn signal lever
- Scroll down and find OIL LIFE menu
Use the band to scroll through the menu
- Press and hold the SET/CLR button until Oil Life 100% appears on the screen
The sound of chimes will be heard
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Buick Encore owner’s manual. This procedure should apply to the first and second generations of the Buick Encore (2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Buick Encore: How To Reset Oil Life Light After an Oil Change (2013-2021) can solve your problem. Good Luck!
Leave a Reply