Buick Cascada: How To Reset Oil Life Light After Oil Change (2016-2019)
Last Updated on January 19, 2021 by Christ
Buick Cascada: How To Reset Oil Life Light After Oil Change (2016-2019) – The Buick Cascada is a mid-range convertible car produced by Buick from 2016 to 2019 for the US market. This car is based on the 2010 Opel Astra.
The Buick Cascada is powered by a turbocharged Ecotec 1.6-liter engine with 200dk and 206 lb-ft of torque. This car has a maximum capability of reaching 221 lb-ft when the over-boost function is activated.
Buick Cascada: How To Reset Oil Life Light After Oil Change (2016-2019)
Time needed: 7 minutes
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Here is how to reset the oil life light on Buick Cascada.
- Turn on the ignition without starting the engine
If your car equipped with ignition button, press and hold the Start/Stop button for 5 seconds without touch the brake pedal
- Press the MENU button briefly until “VEHICLE INFORMATION” appears on the screen
The button is located on the turn signal lever
- Scroll down and find OIL LIFE menu
Use the band to scroll through the menu
- Press and hold the SET/CLR button until Oil Life 100% appears on the screen
The sound of chimes will be heard
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Buick Cascada owner’s manual. This procedure should apply to the first generation of the Buick Cascada (2016 2017 2018 2019 model years). Hopefully, the article Buick Cascada: How To Reset Oil Life Light After Oil Change (2016-2019) can solve your problem. Good Luck!
Leave a Reply