2020 Chevrolet Malibu TPMS Light Tire Pressure Sensor Reset

2020 Chevrolet Malibu TPMS Light Tire Pressure Sensor Reset – The Malibu is a mid-size passenger car produced by Chevrolet from 1964 to 1983 and from 1997 to present. The ninth series, already presented at the New York show in 2015, is more extensive, more similar to the older sister Chevrolet Impala but despite this, the weight has decreased by about 90 kg. The new one is more fuel-efficient than the old one.

In addition to the already known 2.0 engine, a new 1.5 turbo petrol engine is now added while the V6 engine is no longer offered. The ninth series introduces a hybrid version (full hybrid type) with a 1.8 4-cylinder engine and two electric motors. The latter version mounts a 1.5 kWh lithium-ion battery and is capable of travelling up to 89 km / h in electric-only mode. The hybrid versions are characterized by a new blue logo with a silver H.

2020 Chevrolet Malibu TPMS Light Tire Pressure Sensor Reset:

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2020 Chevrolet Malibu, follow these instructions:

• Make sure the vehicle is at a complete stop
• Turn the engine switch off
• Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
• Driving for a few miles (kilometres), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

This tutorial is based on the Chevrolet owner’s manual. This procedure should be work on the latest generation of  Chevrolet Malibu (2020 model years). Hopefully, the article of 2020 Chevrolet Malibu TPMS Light Tire Pressure Sensor Reset useful or you. Good Luck!