2003-2006 Subaru Baja Timing Marks Diagram (2.5L DOHC EJ Engine)

2003-2006 Subaru Baja Timing Marks Diagram (2.5L DOHC EJ Engine) – The Subaru Baja was a by Japanese automakers Subaru from early 2002 to mid-2006 offered in the US four-door pickup to car-based. The Baja made use of technology in the Legacy and Outback models. He was like these made for the US market in the Subaru works Lafayette in Indiana, which is why the manufacturer’s name SIA (Subaru of Indiana Automotive, Inc.) contains. This was preceded by the production model was in 2000 a study called STX, while not reinvented the concept of car-based pickups, but revived after there was no longer the similarly designed Ford Ranchero, Chevrolet El Camino, and Subarus own BRAT for over ten years.

The Baja was 15 centimeters longer than the Outback and offered a four-door passenger cabin, behind was a 1040 mm long open cargo area with rear tailboard. The rear seat could be folded like a little behind it flap in the rear wall, resulting in a 1900 mm long cargo area revealed. This versatile concept rivaled the Baja against much larger and more fuel-intensive US models like the Chevrolet Avalanche and the Ford Sports Trac. This versatile concept rivaled the Baja against much larger and more fuel-intensive US models like the Chevrolet Avalanche and the Ford Sport Trac. Subaru turned to the Baja to a young sporty clientele that recognized the advantages of relatively small dimensions and the Subaru typical all-wheel drive. Accessories such as bike rack underlined the marketing objective of Baja yet.

2003-2006 Subaru Baja Timing Marks Diagram (2.5L DOHC EJ Engine):

1. Arrow mark
2. Timing belt
3. 28 tooth length
4. 54.5 tooth length
5. 51 tooth length
6. 28 tooth length
7. Install it in the end
A. Align mark (A) on the crank sprocket with a mark on the oil pump cover at cylinder block.
B. Align the single line mark (B) on intake cam sprocket (LH) with a notch on the timing belt cover
C. Align single line mark (C) on exhaust cam sprocket (LH) with the notch on the timing belt cover
D. Align single line mark (D) on the intake cam sprocket (RH) with a notch on the timing belt cover.
E. Align single line mark (E) on the exhaust cam sprocket (RH) with a notch on the timing belt cover.

Note: Align the alignment mark on the timing belt with marks on sprockets in the alphabetical order shown in the figure. While aligning marks, position the timing belt properly. This diagram applies to Subaru Baja 2003 2004 2005 2006 model years which uses EJ DOHC Engine. For more detail please watch the following video:

This series engines are all boxer four-cylinder, 16-valve configuration is divided into two kinds SOHC or DOHC; naturally aspirated or turbocharged form in there. In addition to this series of engines, Howard won ten awards the best car engine, namely the 2004 and 2010 model EJ257 EJ255 type. This type of engine with variable valve timing technology for the i-AVLS intelligence valve lifting system, each cylinder intake valve rocker arm with its cam driven by the Ministry.

EJ-type engine corresponding to the 5 bracts it becomes higher output than EA-type. However, the crankshaft length is extended for this purpose, bore pitch is wider. The main bearing caps in the general engine does not exist, since the opposing cylinder block also serves as this, the support rigidity becomes high. The opening port is only the oil pan mounting portion of the lower side. Right, and the left cylinder block is divided by the crankshaft, has a half-skirt shape in a typical engine, it is bolted. This diagram is based on the Subaru workshop manual. Hopefully the article of 2003-2006 Subaru Baja Timing Marks Diagram (2.5L DOHC EJ Engine) useful for you.