How To Reset Maintenance Service Light on Volvo V60 (2011-2021)

How To Reset Maintenance Service Light on Volvo V60 (2011-2021) – The Volvo V60 is a station wagon produced by the Swedish car manufacturer Volvo in Torslanda since September 2010. The V60 is built on the shortened wheelbase chassis of the flagship S80 (the Y20 platform also used by the V70 and XC60).

The car has a five-door, five-seater bodywork, and its exterior lines straddle the D-segment and E-segment. In 2018, Volvo launched the second generation. It takes up the style of its older sister V90, with which it shares the mechanics, except for the air suspension, which is not available on the V60.

How To Reset Maintenance Service Light on Volvo V60 (2011-2021)

When the Maintenance Overdue message appears in the display, it’s time for regular service at the workshop. The system must be reset after performed the maintenance service on your vehicle. Depending on your vehicle model, here are a few ways to reset the maintenance  light on Volvo V60:

1st Generation (2011-2018)

There are 2 ways to reset the service light on the second generation of the Volvo V60 (2011 2012 2013 2014 2015 2016 2017 2018). Both use different methods. Depending on your vehicle model year, here’s how to do it:

With Cluster Button

With Turn Signal Lever

Follow these instructions if your vehicle is equipped with a control button on the turn signal lever.

• Keep the remote key into the ignition slot and then press the START/STOP ENGINE button briefly
• Use the thumbwheel on the turn signal lever to select Trip 2 or T2

• Press and hold the OK button on the end of the lever while holding the START/STOP ENGINE button
• Keep holding the OK button until the ⓘ indicator blinks
• Release both buttons when you hear a chime
• Verify the indicator has been reset by starting the engine

2nd Generation (2019-2021)

Unlike the previous generation, you can reset the maintenance light using the Cruise Control button on the steering wheel in this latest generation (2019 2020 2021). Follow these steps:

• Turn off the ignition and close all doors
• Place the ignition to the position I by turn the START knob clockwise and release it
• Press and hold the (-) REDUCE SPEED button while starting the engine

• Keep hold the (-) REDUCE SPEED button until the ℹ️  indicator blinks
• Release the button when the ℹ️ indicator flashes 3 times
• If successful, a Maintenance Reminder Reset message will appear on the screen

These instructions are based on the Volvo V60 owner’s manual. This procedure should apply to the first and second generations of the Volvo V60 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Maintenance Service Light on Volvo V60 (2011-2021) can solve your problem. Good Luck!