Tips

How to Reset Nissan Armada ECU Check Engine Light

How to Reset Nissan Armada ECU Check Engine Light – Nissan Armada is Nissan’s full-size SUV. It shares its bowl-on-frame F-Alpha platform with the Nissan Titan pickup, Nissan Xterra SUV, Nissan Frontier pickup and Pathfinder SUV Nissan. A luxury version of the Armada as the Infiniti QX56 sales from 2004 to 2010, after which it is converted to a platform based on the Nissan Patrol. All Armadas are currently built in Canton, Mississippi, USA.

Facilities include, among other things ESP and airbags for all three rows of seats. The tailgate can be opened electrically and releases a maximum of 2574 liters trunk free. Inside the vehicle an automatic climate control for the front rows is available. For the rear seats, there is a DVD entertainment system, the screen is located on the roof. There is also a Keyless Go system, a hard-drive navigation system with voice control and touch screen, a reversing camera and electrically adjustable pedals and seats.

How to Reset Nissan Armada ECU Check Engine Light:

Time needed: 17 minutes

If you want to turn off or clear the Check Engine Light / ECU light in 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Nissan Armada, perform the following procedures within the specified time! Because timing is extremely critical.

  1. Turn the ignition key to position “ON” without starting the engine and wait 3 seconds.

  2. Fully press and release the accelerator pedal five times within 5 seconds.

  3. Wait 7 seconds

  4. Fully depress the accelerator pedal all the way to the floor and hold for ten seconds. until the CEL starts blinking.

    At this point, the light CEL should start flashing error code stored in the system and you can release the pedal. If you only get five flashes slowly or not flashing at all, then it is time You went on one of the above steps and you have to start from scratch.

  5. Fully release the accelerator pedal (while the CEL is still blinking) and wait about 10 seconds.

  6. Fully depress the accelerator pedal and keep it for more than 10 seconds.

  7. Fully release the accelerator pedal (The CEL light will continue to blink).

  8. Turn the ignition off and start the engine to verify the indicator has been reset.

For more details, please watch the following video:

Note: Repeat the process, if the lights still illuminate when you start the engine. Timing is EXTREMELY critical to resetting the ECU. This tutorial is based on the Nissan repair manual. This procedure should be work on all generations of Nissan Armada (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How to Reset Nissan Armada ECU Check Engine Light useful for you. Good Luck!

Christ

Recent Posts

Exploring the Tech-Advanced Safety Features of Honda Civic

When it comes to safety on the roads, nothing beats the sterling integration of technology…

6 months ago

Mastering Car Oil Changes: Crucial for Business Efficiency

Imagine a car engine as the heart of a business. Without proper and regular maintenance,…

6 months ago

Avoiding Common Car Maintenance Mistakes

Maintaining the health of your car is much like maintaining your health. Ignoring minor symptoms…

6 months ago

Petrol vs Diesel: Unravelling the Used Jeep Wrangler Conundrum

The quest to find the perfect engine variant, when in the market for a used…

7 months ago

Mastering DIY Checks for a Used Jeep Wrangler

When it comes to advancing your automotive acumen, understanding the ins and outs of purchasing…

7 months ago

Key Maintenance Tips for Used Jeep Wranglers

Jeep Wranglers, known for their robust character and off-road prowess, can prove to be resilient…

7 months ago

This website uses cookies.