Categories: Tips

How to Reset Nissan 370Z ECU Check Engine Warning Light

How to Reset Nissan 370Z ECU Check Engine Warning Light – Nissan through ‘Nismo presenting a new concept car. Nissan 370Z Nismo Concept Roadster uses a V6 engine capacity of 3700 ccs with technology Variable Valve Event and Lift Control (VVEL). This engine has been upgraded via the exhaust system models H, muffler tuning and optimization of the ECU. Power output reached 350 hp.

Nismo Nissan 370Z Roadster Concept is also equipped with sophisticated suspension Nismo concoction. This includes the installation of a special order and stabilizer bars. Nissan Sport Brakes and a Viscous Limited-Slip Differential (VLSD) is also installed in this roadster. For the appearance of Nissan 370Z Nismo Concept Roadster seems very inspired by the Nissan GT-R Nismo. Aerodynamic devices, DRL, black bezel headlights and distinctive graphics Nismo installed in this car.

How to Reset Nissan 370Z ECU Check Engine Warning Light:

Time needed: 17 minutes

If you want to turn off or clear the Check Engine Light / ECU light in 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Nissan 370Z, perform the following procedures within the specified time! Because timing is extremely critical.

  1. Turn the ignition key to position “ON” without starting the engine and wait 3 seconds.

  2. Fully press and release the accelerator pedal five times within 5 seconds.

  3. Wait 7 seconds

  4. Fully depress the accelerator pedal all the way to the floor and hold for ten seconds. until the CEL starts blinking.

    At this point, the light CEL should start flashing error code stored in the system and you can release the pedal. If you only get five flashes slowly or not flashing at all, then it is time You went on one of the above steps and you have to start from scratch.

  5. Fully release the accelerator pedal (while the CEL is still blinking) and wait about 10 seconds.

  6. Fully depress the accelerator pedal and keep it for more than 10 seconds.

  7. Fully release the accelerator pedal (The CEL light will continue to blink).

  8. Turn the ignition off and start the engine to verify the indicator has been reset.

For more details, please watch the following video:

Note: Repeat the process, if the lights still illuminate when you start the engine. Timing is EXTREMELY critical to resetting the ECU. This tutorial is based on the Nissan repair manual. This procedure should be work on all generations of Nissan 370Z (2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016) models. Hopefully the article of How to Reset Nissan 370Z ECU Check Engine Warning Light useful for you. Good Luck!

Christ

Recent Posts

Exploring the Tech-Advanced Safety Features of Honda Civic

When it comes to safety on the roads, nothing beats the sterling integration of technology…

1 year ago

Mastering Car Oil Changes: Crucial for Business Efficiency

Imagine a car engine as the heart of a business. Without proper and regular maintenance,…

1 year ago

Avoiding Common Car Maintenance Mistakes

Maintaining the health of your car is much like maintaining your health. Ignoring minor symptoms…

1 year ago

Petrol vs Diesel: Unravelling the Used Jeep Wrangler Conundrum

The quest to find the perfect engine variant, when in the market for a used…

1 year ago

Mastering DIY Checks for a Used Jeep Wrangler

When it comes to advancing your automotive acumen, understanding the ins and outs of purchasing…

1 year ago

Key Maintenance Tips for Used Jeep Wranglers

Jeep Wranglers, known for their robust character and off-road prowess, can prove to be resilient…

1 year ago

This website uses cookies.