How To Reset Nissan Juke TPMS Tire Pressure Warning Light (2011-2019)
Last Updated on December 17, 2019 by Christ
How To Reset Nissan Juke TPMS Tire Pressure Warning Light (2011-2019) – This is a car that is now the pride of many people, to be a dream in which to design Juke car is very unique and funny like a car that has a happy nature. And this is a very strong car going under on the way up or the way straight, very strong. Juke-R debut in Dubai at the time as a sporty crossover concept. Source furor curiosity of the public, because they want to know how the performance of the Nissan Juke-R pinned Nissan GT-R engine under the hood.
GT-R engine itself was legendary as one of the best engines in the class sportscar. Juke-R’s presence itself is a work of creativity and innovation by a team of Nissan Technical Centre Europe and is supported directly by Nissan Motor Corporation (NMC) as a global project. NMC itself has a special reason why it has to make the Juke-R limited edition. The essence of the Juke-R project is, creating a major crossover that blends ‘Nissan Juke’ as the best-selling crossover with the Nissan GT-R, a most innovative sports car ever built by Nissan.
How To Reset Nissan Juke TPMS Tire Pressure Warning Light (2011-2019):
To reset the Tire Pressure Monitoring System (TPMS) light on your 2011 2012 2013 2014 2015 2016 2017 2018 2019 Nissan Juke, follow these steps:
- Make sure the vehicle is at a complete stop
- Turn the engine switch off
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 25 mph.
If the above procedure does not work, try using the following procedure at your own risk!
Time needed: 17 minutes
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Locate the TPMS interface plug. This is a white female plug that is attached to the OBD II wire loom under the dash. You may have to cut the tape that is holding the TPMS interface plug to the OBD II wire loom.
- Insert a paper clip or wire to the plug interface.
- Turn the ignition ON but do not start the engine
- Tap the end of the paper clip on any exposed ground (metal) 6 times.
- If the way you are correct, the TPMS warning light will start blinking slowly.
If it flashes fast that’s not right. If yours isn’t flashing slowly then check your connections, turn the ignition off and start over at step 4.
- Once you confirm the lights do not stop flashing, driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 16-25 mph.
- The light will quickly come back on due to the low tire pressures. Refill your tires to the correct pressure.
For more details, please watch the following video:
We got this tutorial from Nissan specialists. The procedure above can be applied to the latest generations of Nissan Juke (2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully the article of How To Reset Nissan Juke TPMS Tire Pressure Warning Light (2011-2019) useful for you.
I have a 2009 Altima with 2014 Juke rims and the tire light is on the dash………….will the process above work with an older car?
Will the newer sensor work with the older car?