Reset Tire Pressure TPMS Warning Light on 2017 Toyota C-HR

Reset Tire Pressure TPMS Warning Light on 2017 Toyota C-HR – Toyota C-HR is a crossover SUV produced by the automaker Toyota since 2016, which was presented in Paris in 2014 eponymous salon as a prototype of a design studio, called Toyota C-HR Concept. At the Frankfurt Motor Show 2015, a revised version of the same concept has been presented, while the production version of the put into mass production was presented at the Geneva Motor Show in 2016.

The model is based on the new platform tnga Toyota; the name, which is an acronym, stands for Coupe High Rider. In addition to a 1.2-liter turbo petrol engine with 85 kW (116 hp), the C-HR is equipped with a hybrid version with a 1.8 liter thermal gasoline, that joined to a total electric another delivers 90 kW (122 hp). The original schedule provides that the model was sold with Toyota’s Scion brand in North America. Then the leaders of Nissan have decided to deploy the C-HR directly through the Toyota brand worldwide.

How to Reset Low Tire Pressure Sensor on 2015 Toyota Mirai:

If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor need to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2016 2017 Toyota C-HR, follow these steps:

  • Stop the vehicle in a safe place and turn the engine switch to the LOCK position.
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Turn the engine switch to the “ON” position
  • Select Settings Display by use the DISP button on steering wheel

  • Press and hold the DISP button to enter the adjustment mode.
  • Select TPMS and then press and hold the DISP button
  • Select SET to confirm, and then press and hold the DISP button again
  • Wait for a few minutes until initialization is completed.
  • Finally turn the engine switch to the “ACC” or “LOCK” position.

Vehicles with color display:

  • Stop the vehicle in a safe place and turn the engine switch to the LOCK position.
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Press the Arrow button on the steering wheel to select Setting menu
  • select the Vehicle Settings and Center button
  • Select Tire Pressure Setup and press Center button
  • Wait for a few minutes until the tire pressure warning light blinks 3 times.
  • Finally turn the engine switch to the “ACC” or “LOCK” position.

The procedure above can be applied to all the generations of Toyota C-HR (2016 2017) model years, which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully the article of Reset Tire Pressure TPMS Warning Light on 2017 Toyota C-HR useful for you.

(Visited 685 times, 12 visits today)
Tagged with: , ,
One comment on “Reset Tire Pressure TPMS Warning Light on 2017 Toyota C-HR
  1. Viggo Borgan says:

    Toyota CHR with color display:
    Select Tire Pressure Setup and press 3 times on the Center button.
    Wait for a few minutes until the tire pressure warning light blinks 3 times. -> Then then wait several minutes to get an accurate reading of tire pressure and turn the vehicle off.

Leave a Reply

Your email address will not be published. Required fields are marked *

*