2018 Toyota Avensis Tire Pressure TPMS Warning Light Reset

2018 Toyota Avensis Tire Pressure TPMS Warning Light Reset – The Toyota Avensis is a passenger car classified as a D-segment sedan produced since 1997 by the Japanese car manufacturer Toyota. Currently, it has come to the third generation. The Third series debuts in final form at the Paris International Motor Show 2008 edition and was designed by Centro Toyota’s French Style.

Among the engines, new petrol engines will debut while the turbodiesel will be reviewed in terms of emissions and consumption with values reduced from 10 to 26%. The petrol includes the 132 HP 1.6 VVT-I, which combined with a six-speed manual emits 152 g / km of [[CO2]], the 147 hp 1.8 VVT-I which emits 154 g / km of carbon dioxide with the manual is 157 with the new Multidrive S continuously variable transmission and the 2.0 direct injection of 152 HP, which emits 163 g / km of CO2 with the manual and 164 with the Multidrive S.

2018 Toyota Avensis Tire Pressure TPMS Warning Light Reset:

If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2015 2016 2017 2018 Toyota Avensis, follow these steps:

  • Stop the vehicle in a safe place and turn the engine switch to the LOCK position.
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Turn the engine switch to the “ON” position
  • Press the DISP button briefly until you see the SETTINGS menu

  • Press and hold the DISP button to enter the adjustment mode.
  • Press the DISP button briefly until you find TIRE PRESSURE WARNING SYSTEM
  • Next, press and hold the DISP button to enter
  • Select SET TYRE PRESSURE and press and hold the DISP button
  • Select SET and then press and hold the DISP button again to confirm
  • Wait for a few minutes until initialization is completed.
  • Finally turn the engine switch to the “ACC” or “LOCK” position.

Vehicles with color display:

  • Stop the vehicle in a safe place and turn the engine switch to the LOCK position.
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Turn the engine switch to the “ON” position
  • Press the navigation button on the right side steering wheel to select menu

  • Select the SETTINGS MENU
  • Select TIRE SETUP
  • Select SET TYRE PRESSURE
  • Select SET to confirm
  • Wait for a few minutes until the tire pressure warning light blinks 3 times.
  • Finally turn the engine switch to the “ACC” or “LOCK” position.

The procedure above can be applied to all the generations of Toyota Avensis (2015 2016 2017 2018 2019 model years), which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully the article of 2018 Toyota Avensis Tire Pressure TPMS Warning Light Reset useful for you.

(Visited 153 times, 1 visits today)
Tagged with: , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.