2017 Toyota Aygo Low Tyre Pressure TPMS Warning Light Reset – The Toyota Aygo is a typical city car sold since July 2005. The mechanics, profoundly updated compared to that of the previous Aygo, is common to that of the Citroën C1 and Peugeot 108 city cars. The only engine available is the 1.0 three-cylinder (69 hp) petrol with the five-speed manual transmission or, on request, with the robotized one.
At the 2014 Geneva Motor Show, again with the other cars produced by the same project, the second generation is presented with a more refined and cutting design with a front with an “X” shape enclosing the air intakes , the fog lights, the thin headlights (with LED daytime running lights) to the rear-view mirrors and side windows.
2017 Toyota Aygo Low Tyre Pressure TPMS Warning Light Reset:
If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor needs to be reset. To reset the Tire Pressure Monitoring System (TPMS) light on your 2014 2015 2016 2017 Toyota Aygo, follow these steps:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Turn the engine switch to the “ON” position
- Locate and press the tire pressure warning reset button until the tire pressure warning light blinks 3 times.
- Wait for a few minutes with the engine switch in the “ON” position
- Finally turn the engine switch to the “ACC” or “LOCK” position.
For more details please check the following video:
The procedure above can be applied to all the generations of Toyota Aygo (2014 2015 2016 2017) models, which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article of 2017 Toyota Aygo Low Tyre Pressure TPMS Warning Light Reset useful for you.