2008 Lincoln Mark LT TPMS Light Tire Pressure Sensor Reset Procedure

2008 Lincoln Mark LT TPMS Light Tire Pressure Sensor Reset Procedure – Mark LT is a full-size four-door luxury pickup produced by Lincoln since 2006. In the United States, the car was sold until 2008, while in Mexico the marketing continued despite a temporary break in 2009. The sale of Mark LT started in January 2005 for the model year 2006. The model succeeded in the very unlucky Lincoln Blackwood, which was only marketed in 2002 and was only available with rear traction.

The Mark LT, on the other hand, is equipped with a rear-wheel-drive as well as an optional all-wheel drive. The car, which is assembled in Dearborn (Michigan) and in Cuautitlán (Mexico), is built on the Ford P2 platform. The Mark LT is based on the Ford F-150 and was equipped with a V6 engine of 5.4 l displacement. In 2011, this engine was replaced by a 5-liter V8 engine. In both cases, the propulsion unit is mounted in front.

2008 Lincoln Mark LT TPMS Light Tire Pressure Sensor Reset Procedure

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2007 2008 Lincoln Mark LT, follow these instructions:

• Make sure the vehicle is at a complete stop
• Turn the engine switch off
• Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
• Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

This tutorial is based on the Lincoln owner’s manual. This procedure should be work on the latest generation of Lincoln Mark LT (2007 2008 model years). Hopefully, the article of 2008 Lincoln Mark LT TPMS Light Tire Pressure Sensor Reset Procedure useful for you. Good Luck!