2006-2016 Mazda MX-5 Miata TPMS Light Tire Pressure Reset

Last Updated on January 16, 2020 by Christ

2006-2016 Mazda MX-5 Miata TPMS Light Tire Pressure Reset – Mazda presents the 2016 Mazda MX-5 Miata Roadster is the latest generation variant. This model is presented since 1989 and continues to maintain its charm to models released in 2016. Mazda has packed a lot of new features, technologies, and infotainment systems in the 2016 Miata MX-5 Roadster. Mazda Miata in the category of the most powerful cars in its segment but certainly stylish.

Mazda has succeeded in reducing the size and weight of the car slightly, less than 150 pounds from its predecessor. However, in 2016 Miata is wider. With 45mm short overhangs, Mazda designers have been doing good with their KODO design philosophy. Hood height has been reduced by 28mm, and the 20mm driver’s seat is lower than the previous model. The steering wheel radius has been reduced 2mm. The car adds convenience by offering an additional 12mm to the driver’s foot.

2006-2016 Mazda MX-5 Miata TPMS Light Tire Pressure Reset

Contents

2006-2016 Mazda MX-5 Miata TPMS Light Tire Pressure Reset:

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your Mazda:

  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Turn ignition to ON, then to OFF and wait for 15 minutes
  • Driving for a few miles (kilometers), calibration will complete after 10 minutes of cumulative driving at least 25 km/h (16 mph), and then verify that it turns off.
  • Sensor IDs will then register.

For the latest models (2016):

Time needed: 7 minutes

  1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

  2. Let the tires cool, then adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  3. Turn the engine switch to the “ON” position

  4. Locate and press the tire pressure warning reset button until the tire pressure warning light blinks 2 times and a beep sound is heard once.

    mazda tpms reset button

  5. Wait for a few minutes with the engine switch in the “ON” position

  6. Finally, turn the engine switch to the “ACC” or “LOCK” position.

This tutorial is based on the Mazda owner’s manual. The procedure above can be applied to all the generations of Mazda MX-5 Miata (2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016) models, which is equipped with a Tire Pressure Monitoring System (TPMS). Hopefully, the article of 2006-2016 Mazda MX-5 Miata TPMS Light Tire Pressure Reset useful for you.

(Visited 4,053 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.