2016 Buick Envision Low Tire Pressure TPMS Light Reset Guide

2016 Buick Envision Low Tire Pressure TPMS Light Reset Guide – The Buick Envision is an SUV from the automotive manufacturer Buick. The vehicle has been built by Shanghai GM in China since the end of 2014. The model is placed between the Buick Encore and the Buick Enclave. On December 4, 2015, Buick announced that the vehicle will also be sold in the US from autumn 2016 onwards.

It debuted at the North American International Auto Show in January 2016 in Detroit. In the United States, the vehicle comes with a 2.0-liter petrol engine with a turbocharger that develops 191 kW (260 hp). It will be China’s first car built by General Motors, sold in America.

2016 Buick Envision Low Tire Pressure TPMS Light Reset Guide:

If you receive a low-tire pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2015 2016 2017 2018 Buick Envision, follow these instructions:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor needs to be reset. To relearn turning off or reset the Tire Pressure Monitoring System (TPMS) light on your 2015 2016 2017 2018 Buick Envision, follow these steps:

  • Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
  • Turn the ignition to position On without starting the engine.
  • Access the cluster applications by using the LEFT arrow button of the five-way DIC control on the right side of the steering wheel

  • Scroll to the Settings application by using UP or DOWN button
  • Press the Center button of the five-way DIC control
  • Scroll to the Info Pages and press RIGHT button
  • Select Edit List or press RIGHT button again
  • Scroll to the Tire Pressure menu
  • Press and hold the Center button until horn sounds
  • Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor.
  • Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.
  • A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.
  • After hearing the confirming horn chirp for the left rear tire, turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

This procedure should be work on the latest generation of Buick Envision (2015 2016 2017 2018) models. Hopefully the article of 2016 Buick Envision Low Tire Pressure TPMS Light Reset Guide useful for you. Good Luck!

(Visited 2 times, 1 visits today)
Posted in Buick, Car Tagged with: , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*